Sixteen Segment Display node¶

The Sixteen Segment Display node outputs a sixteen segment display with variable weight

Inputs¶

The Sixteen Segment Display node accepts an optional bevel map, which the parameter is multiplied by the map value.

The Sixteen Segment Display node outputs two greyscale images, the generated display and a hard mask for all segments

The Sixteen Segment Display node accepts the following parameters:

The Display Mode parameter how the Character Code is handled. ASCII handles the Character Code as an ASCII code (32-115), where 31 displays all segments. Custom interprets the Character Code as an unsigned 16-bit integer(0-65535), where bit positions are used to determine which segments to be turned on.
The Character Code parameter specifies the character to display, based on the Display Mode
The Gap parameter specifies the distance between each segment on the display.
The Thickness parameter controls the thickness of the segments.
The DP Size parameter controls the size of the decimal point on the display.
The DP Position parameter specifies the position of the decimal point on the display.
The Diagonals Rotation parameter controls the rotation of the four diagonal segments on the display.
The Bevel parameter controls the width of the edge of each segment.
The Decimal Point parameter toggles the decimal point on the display on or off, when the Display Mode is set to Custom